How a Roof Repair Company Replaces Damaged Flashing
There are very few things in life which are more frustrating than listening to the continuous drip of water coming in from the roof. In these cases, there is obviously some kind of roof damage, however, finding the source sometimes needs a great deal of investigation. Before you contact a professional roof repair company, try checking your flashing. This is usually the main culprit when it comes to a leaky roof, and sometimes the repair could be simple.
New flashing pieces can be either screwed or glued back into place, however, seals could need to be removed and new caulk installed beforehand. In most cases, you may not even have to replace the flashing at all. A few basic repairs, which do not need much time, may well stop the leak completely. Even though the process can be somewhat trial and error, more often than not, most homeowners can solve the problem by themselves.
Flashing is found on intersection points on a roof, such as peaks and valleys where water will collect and pool. It can be made from copper, vinyl, steel, and aluminium. You can usually find it beneath your roofs shingles, however, it can also be found around the likes of skylights, chimneys, and vent pipes. Basically, flashing can be found on any point on of a roof where there is a major angle change. When flashing is installed properly, it should prevent leaks from happening in these areas, however, age, time, and the weather will eventually damage it.
Your first thing will be to find where the flashing is located, lift up a few shingles to see if the nails holding down are still there. Should they be missing then simply re-anchored it, however, hammering in new nails is not recommended. A better way is to screw your flashing down, after which you should cover the screws with a silicon seal.
Anyone in Rochester NY in need of a reliable roof repair company, call us today. We are The Roof Saver Flat Roof Specialist, available at (585) 303-0734.